VP Racing Fuel Stabiliser with Ethanol Protection

VP Racing Fuel Stabiliser with Ethanol Protection
£ 12.00
VP Racing Fuel Stabiliser with Ethanol Shield has been designed for use petrol systems using pump fuel with Ethanol mix. The VP Racing Fuel Stabiliser is also a top-level fuel system cleaner detergent that keeps your engine clean and operating at maximum performance.

Supplied in 236ml bottle. One bottle will treat up to 80 gallons (303 litres) of fuel.

VP Racing Fuel Stabiliser explained:-
If you own seasonal outdoor power equipment, classic cars, motorcycles, or other small engine equipment that isn't used regularly, VP Fuel Stabiliser with Ethanol Armor will eliminate ethanol fuel-related issues, keep your vital engine components clean and running at peak performance, and help you to avoid costly and unnecessary repairs. Its proprietary formula is designed for use in all 2-cycle and 4-cycle petrol engines.

Some of you may ask, "What is fuel stabiliser?" In short, it's a solution that bonds with gasoline to prevent evaporation. By doing so, it prevents fuel from forming sticky resins that can lead to serious engine problems. When a car or piece of equipment is used regularly, the petrol burns up before it can evaporate and degrade. But, when petrol sits in a tank for an extended period, it starts to break down and deteriorate, leaving behind gunked-up, gummy deposits throughout your engine. Ethanol-blended fuel, which makes up the majority of pump petrol, is the cause for most of the mayhem. Among other things, ethanol absorbs water, which promotes corrosion, which is never a good thing for an engine. In addition, once a certain amount of water is absorbed - as little as 3/4 ounce - something called phase separation takes place, which is when the ethanol/water cocktail separates from the petrol, leaving a layer of petrol at the top of the tank and the ethanol/water layer at the bottom, and never the twain shall meet. VP Fuel Stabilizer with Ethanol Armor contains a phase separation inhibitor. Our technologically advanced formula includes a superior detergent that cleans gums, varnish, and carbon deposits, and eliminates the need for spending extra money on higher-octane premium pump petrol.

Our EPA-registered fuel stabiliser features an advanced anti-corrosion package that has been tested. NACE International is considered the world's leading professional organisation for the corrosion control industry. The NACE Standards Test for Ferrous Metals uses a 1-5 grading scale to measure the ability to resist corrosion. Both ethanol-free and E10 (10% ethanol) fuel received a 0.7 grade for resisting corrosion. That's right, less than 1.0. When our fuel stabiliser was added to each, the corrosion rating improved to 5.0 - top of the charts!

As if all of that wasn't enough, our additive aids in reducing engine heat and extends engine life by lubricating the ethanol in petrol. This reduces what is known as parasitic friction. When you reduce friction, you reduce the amount of heat caused by friction. A camel might love extreme heat; engines not so much.

There are a couple of other important things to consider when comparing brands of fuel stabilisers: how long do they last? VP Fuel Stabiliser with Ethanol Armor stabilises for up to three years.* Other major brands only last for one to two years. It's right there in their product description. Moreover, a little goes a long way. One 8 oz. bottle of our additive will treat up to 80 gallons of gasoline (one ounce per 10 gallons of gas). If you research other brands, you'll see that an ounce of their product treats five or six gallons of fuel, with some calling for two to three ounces to treat 10 gallons of petrol.

You may also wish to consider