ITG Megaflow Air Filter JC30 Sausage Domed Type

Manufacturer:
ITG
Click here for:
ITG JC30 Specification Sheet
£ 90.00
To order or to check stock first select all options below
ITG Megaflow foam air filter for JC30 size base plate. The JC30 model of ITG Air Filter is designed to suit one carburettor. This domed sausage type filter is hand built, and ideally suited where space is at a premium for when a standard JC30 will not fit.

The two outer layers of foam provide optimum filtration and load-up capacity whilst the inner layer is made from special self-extinguishing foam. These two layers combined give the very best air flow, engine protection and safety.

The ITG JC30 Sausage Air Filters are available in differing heights to help fitment for your application. ITG recommend fitting the tallest element possible, though a gap of 13mm (1/2") average must be left over the top of the filter for air to circulate. When using Ram pipes, there must be an absolute minimum gap of 19mm (3/4"), but preferably around 32mm (1 1/4") between the end of the ram pipe and the underside of the top of the filter.

Please select your required JC30 Air Filter internal height from the drop down menu above.