Aluminium Donut For Welding Tight Bend 51mm Outside Diameter

£ 30.25

51mm (2 Inch) O.D. aluminium 'Donut' designed for custom fabrication of intake manifolds and intercooler pipes. These aluminium parts enable a fabricator to form very tight radius bends which are impossible to form with a mandrel tube bender.

The Donuts can be cut at any degree of bend to produce angles up to 180°. Each donut is spun in 1.5mm aluminium and is supplied in two halves ready for welding. Centre line radius of 38.25mm.