Setrab Oil Cooler ADAPTOR -8 JIC.
All Setrab Oil coolers are supplied with M22 female threads. A male/male
adaptor is required mate to the normal oil union threads. Adaptors are available
with BSP, JIC and Metric threads and 2 are required for each cooler.
All Setrab Oil Coolers are made in Sweden.
The coolers must be mounted so that they are protected from excessive
vibration, rubber bobbins are ideal, and all 4 brackets should be used. The hose
runs to the cooler should not be rigid or exert tension on the unions. A general
rule is that a low cooler with a few long tubes gives a slightly higher pressure
drop than a narrow cooler with more rows. |
