|
The Mocal oil pressure and turbo gauges are installed in a very
similar way. Method one is to use the oil pressure pipe which is available
in either 1.5 or 3m lengths and to have the
appropriate male male adapter. Just screw one end into the back of
the gauge and the other end will need the male male adapter. If you do not
know what thread your block is then we may be able to tell you from the
data book.
If you require push on fittings and a T piece for your turbo gauge
then you will need a T piece, the adapter for the back of the gauge and the
vacuum hose which is sold per metre.
|
