We now stock a wide
range of Setrab Proline Oil coolers. The Setrab oil cooler is unique in that it
can have almost any threaded unions on the top. Setrab Oil Coolers are supplied
in 3 widths, 115mm, 230mm and 305mm Matrix.
Setrab Adaptors. All
Setrab Oil coolers are supplied with M22 female threads. A male/male adaptor is
required mate to the normal oil union threads. Adaptors are available with BSP,
JIC and Metric threads and 2 are required for each cooler. All Setrab Oil
Coolers are made in Sweden.
The coolers must be
mounted so that they are protected from excessive vibration, rubber bobbins are
ideal, and all 4 brackets should be used. The hose runs to the cooler should not
be rigid or exert tension on the unions.
A general rule is that
a low cooler with a few long tubes gives a slightly higher pressure drop than a
narrow cooler with more rows.